Reset Black Pak Case

Reset Black Pak Case

Large-volume fast-release chlorine dioxide powder for professional gas-vapor or liquid applications. The two-component A & B powder format is designed for use with Reset activation hardware.

Price includes standard shipping and handling.

• Standard gas coverage: 50,000 ft³ per Pak
• Case configuration: 20 A and B Paks
• Contents: A & B powder components
• Format: Powder

Use only as directed and in accordance with the product label and applicable regulations.

ClO₂ Gas Activation

1) Preparation
Create and/or seal the treatment area as a confined space without direct sunlight. Close windows, doors, and shades; disconnect smoke alarms for the treatment period; and post Warning/Do Not Enter signs.

Determine the size and severity of the space, select the proper Reset product, and remove people, plants, and pets. Keep contents dry. Place the Reset ClO₂ container near the center of the space or HVAC return with the system fan on.

2) Gas Product Activation
Note: Gas concentrate will stain if spilled. Never place your face over the container. Wear the P100 respirator, goggles, gloves, and other protection specified by the SDS.

Add the appropriate water to the activation container, insert the aerator tube and stone, add the Reset Tablets/Paks, turn on the aerator, and immediately evacuate the confined space.

Gas Application Treatment Time: 1 hour minimum; 12–24 hours is best. Use multiple products and containers for large or fragmented spaces.

3) Air out the confined space before re-entry. If a chlorine smell remains, continue airing it out.

4) Safely dispose of remaining ClO₂ down the toilet or drain.

ClO₂ Liquid Generation

Add Reset powder to water in a suitably sized opaque container to generate the concentration specified by the product instructions.

1) Preparation
Clean visible dirt and organic matter from the surface before treatment.

2) Liquid Product Activation
Fill the corresponding opaque container with tap water, add the A & B powder components as directed by the product label, cap the container, and allow the product to mix and generate properly.

3) Liquid Application Treatment
Apply to compatible atmospheres, surfaces, clothing, furniture, upholstery, and materials with a mop, sponge, pump sprayer, or non-thermal fogger.

DO NOT WIPE. LET DRY. DO NOT RINSE. Always test material compatibility. Never intentionally inhale chlorine dioxide. Wear personal protective equipment specified by the SDS.